GPS L1/L5、BDS B1/ B2、GLONASS L1
Dimensions(mm)：56.5*61.5*23.0mm
Connector: SMA-J
Protection: IP65
General info.：
Product Name：Dual band car antenna
P/D：V1831-012-A-01
Frequency：GPS L1/L5、BDS B1/ B2、GLONASS L1
Application：
This is a high precision car antenna covered GPS L1/L5, BDS 2nd generation B1/ B2, GLONASS L1, it can meet the request of multi-system compatible and high precision measuring from GNSS surveying equipment. It is widely be used in Geodesy and mapping, Marine survey, Geological deformation monitoring and other filed.
Features：
Antenna adopted multi-feed point and completely symmetrical structure, which lower the influence of antenna to measurement error while surveying.
Antenna has high Gain, with pattern wide beam, with good reception with low elevation signal, insure the normal satellite signal reception even in serious occlusion environment.
The Low noise amplifier section adopted pre-filtering scheme to effectively suppress out-of-band interference and improve the reliability of the system.
| Electrical Spec. | |
| Frequency Range(MHz) | GPS L1/L5、BDS B1/ B2、GLONASS L1 |
| Polarization | Right-hand circular polarization |
| Gain(dBi) (Under 200*200mm base board） | Elevation 90°≥4.0 -1dB beam width°≥120° |
| Axial Ratio(dB) | ≤3 |
| LNA Gain(dB) | 2`12 |
| Flatness in Band (dB) | ±2 |
| V.S.W.R | ＜2.0 |
| Noise Figure (dB) | ＜3.0 |
| DC Voltage (V) | 3.0-5.0 |
| Current (mA) | ＜40 |
| Impedance(Ω) | 50 |
| Mechanical Spec. | |
| Dimensions(mm) | 56.5*61.5*23.0mm |
| Connector Type | 3M(cable length) with SMA_J |
| Operating Temperature (℃) | -45～+85 |
| Storage Temperature (℃) | -55～+85 |
| Operation Environment | Outdoor |
| Ingress Protection | IP65 |
| Structure diagram | |
| |
+81-3-6895-7402
+81-3-6895-7402VLG Technology Japan株式会社
〒105-0004
東京都港区新橋4-21-3
新橋東急ビル2階209
Unit 605,6/F Building 8, Hong Kong-Shenzhen Innovation and Technology Park, Lok Ma Chau Loop,Hong Kong.
ホーム >
Detail
Detail
Detail