Support vertical polarization 824-960MHz & 1710-2690MHz, horizontal polarization 1710-2690MHz;
Parameter (unit), frequency band (MHz): port 1, 800-960MHz & 1710-2690MHz
Parameter (unit), frequency band (MHz): port 2, 1710-2690MHz
VSWR≤1.8
Isolation (dB) ≤-20dB (800-960MHz), ≤-25dB (1710-2690MHz)
Gain: 1.5dBi (800-960MHz); 3dBi (1710-2690MHz)
Directional two-port ceiling antenna
Support vertical polarization 824-960MHz & 1710-2690MHz, horizontal polarization 1710-3600MHz;
Parameter (unit), frequency band (MHz): port 1, 800-960MHz & 1710-2690MHz
Parameter (unit), frequency band (MHz): port 2, 1710-2690MHz
VSWR≤1.5
Isolation (dB) ≤-20dB (800-960MHz), ≤-25dB (1710-2690MHz)
Gain: 6dBi
Ceiling antenna product features
1: The ceiling antenna simulates and adjusts the equal amplitude and phase of the one-to-six and one-to-five feeding networks, so that the antenna is not round in the horizontal direction in each frequency band, and can achieve full indoor coverage without blind spots;
2: Ordinary RF4 panels are used to reduce antenna costs
3: Directional antennas have high gain and long communication distances, and are used in densely populated shopping malls; used in conjunction with ceiling antennas, ceiling antennas cover indoors, but there is a problem of poor signal in the densely populated aisles of shopping malls. Installing wall-mounted antennas and equipment can solve this problem.
4: Multi-port and wide-band antenna customization can be provided.
Small cell antenna
Frequency band (MHz): 698-798, 1710-2180; 824-894, 1850-1915; 728-768, 1930-1995; 2496-2690, 3700-3980
Gain (dBi) ≥2
Non-roundness (dB): 80°, 60°, 45°, ±4 in horizontal direction
VSWR ≤1.8:1
Features:
1: The required height of traditional indoor ceiling antenna is about 120mm, and the installation is not very beautiful. Micro base station antenna has the advantages of low profile, miniaturization, and can be built into the equipment.
2: The special antenna structure is used to meet the antenna's requirements for gain and non-roundness, achieving the same effect as the ceiling antenna, while greatly reducing the cost.
Elevator shaft antenna characteristics and application scenarios
1: The antenna working frequency band is 1710-2200MHz, 3300-3600MHz, the antenna gain is high, the communication distance is long, and it is easy to install.
2: It can solve the problem of no signal coverage of mobile phones and communication terminals in elevators.
3: The installation method is diversified, and two antenna installation methods can be adopted: wall-mounted and ceiling-mounted.
Application scenarios: small base stations, indoor coverage systems, elevator shaft coverage, buildings, airports, and subway coverage. Weiligu has provided a variety of customized services for Weide Technology, Shiju Network, Ankexun, CITIC, China Telecom, China Mobile, China Unicom, and China Tower projects.
+81-3-6895-7402
ホーム >
Detail
Detail
Detail
