• Patent design, independent intellectual property rights;
• Sensitivity -10dBm -65dBm under local blocking, test false alarm rate is 1%;
• Support LBT and FHSS FM mode;
• Support TTL serial communication.
| Working frequency | 902-928MHz(US),865-868MHz(EU) |
| Protocol | EPC C1 Gen2,ISO 18000-6C |
| Size | 31.17*26*3mm |
| Antenna interface | IPEX |
| RF power | 0~26dBm(Software adjustable) |
| Reading distance | 0~3m(depend on antenna,tag and environment ) |
| Writing distance | 0~30cm |
| Working mode | Fixed frequency / frequency hopping |
| Communication port | TTL |
| Power | DC 5V |
| Power consumption | 2W |
| Read rate | > 300 times / second |
| Label detection | Support RSSI value detection |
| SDK | Demo and C++, C#,JAVA,Android |
| Reading mode | Multiple tag read |
| Storage humidity | 5% ~ 95% RH without condensation |
| Storage temperature | -20℃~+75℃ |
| Working temperature | -40℃~+85℃ |
JT-M2320 STRUCTURE

| Interface number | Interface name | Interface definition | Interface number | Interface name | Interface definition |
| LCC | WF type P1 interface | ||||
| 1 | GND | Ground | 1 | GND | Ground |
| 2 | BEEP | Buzzer control foot | 2 | GND | Ground |
| 3 | IO4 | GPIO interface | 3 | +5V | Power input |
| 4 | IO3 | GPIO interface | 4 | +5V | Power input |
| 5 | EN | Power enable pin | 5 | EN | Power enable pin |
| 6 | GND | Ground | 6 | IO3 | GPIO interface |
| 7 | +5V | Power input | 7 | IO4 | GPIO interface |
| 8 | +5V | Power input | 8 | BEEP | Buzzer control foot |
| 9 | GND | Ground | 9 | RXD | TTL serial port receiving |
| 10 | TXD | TTL serial port transmission | 10 | TXD | TTL serial port transmission |
| 11 | RXD | TTL serial port receiving | 11 | GND | Ground |
| 12 | LED-OUT | LED status indicator pin | 12 | LED-OUT | LED status indicator pin |
| 13 | ANT | Antenna interface | |||
| 14 | GND | Ground | |||

+81-3-6895-7402
