n type male to sma male cable

"N type male to SMA male cable" refers to the cable from N type male to SMA male. Here is a detailed introduction about it:
Features and Applications
Features: This type of cable usually has good electrical properties, such as low insertion loss, low voltage standing wave ratio, etc., and can maintain stable signal transmission over a wide frequency range. At the same time, it also has a certain degree of flexibility, which is convenient for installation and wiring.
Application: Commonly used to connect devices with N type male interface to devices with SMA male interface, widely used in telecommunications, networks, wireless communications, radar, detection and measurement instruments and other fields.
Main parameters
Impedance: The common impedance value is 50 ohms, which is used to match most RF and data transmission systems to achieve optimal signal transmission efficiency and reduce signal reflection and loss.
Frequency range: Generally supports frequency ranges from DC to several GHz or even higher, depending on the type and quality of the cable. For example, SMA connectors are usually suitable for microwave fields with a frequency range up to 26.5GHz.
Insertion loss: refers to the energy loss when the signal passes through the cable, usually expressed in decibels (dB). Low insertion loss means that the signal is less lost during transmission and can maintain good signal strength and quality.
Voltage standing wave ratio: reflects the degree of signal reflection in the cable. A low voltage standing wave ratio indicates that the impedance matching between the cable and the connected device is good, the signal reflection is small, and the transmission efficiency is high.
Cable type
RG series coaxial cables: such as RG316, RG174, RG8, etc., are common cables used for N-type male to SMA male connection. Among them, RG316 has a smaller outer diameter and better flexibility, which is suitable for some occasions with limited space; RG8 has a larger outer diameter and lower loss, which can be used for long-distance transmission or high-power applications.
PE series coaxial cables: such as PE-P141, PE-P195, etc., have the characteristics of low loss and high reliability, and are often used in high-precision test and measurement or occasions with high requirements for signal transmission.
Selection points
Electrical performance: According to the actual application requirements, select cables with appropriate electrical performance indicators such as impedance, frequency range, insertion loss and voltage standing wave ratio to ensure the quality of signal transmission.
Cable length: According to the distance between the devices, select cables of appropriate length to avoid signal loss or wiring difficulties caused by too long or too short.
Quality and brand: Select cables with well-known brands and reliable quality to ensure their stable performance, good durability and good after-sales service.
Environmental factors: Consider the environmental conditions of cable use, such as temperature, humidity, corrosiveness, etc., and select cables with corresponding protective properties, such as waterproof, moisture-proof, flame-retardant and other characteristics.